Structure–activity relationships of anthocyanidin glycosylation

This paper summarizes the main achievements about the structure–activity relationships of anthocyanidin glycosylation. Anthocyanidin glycosylation is the essential step of anthocyanin biosynthesis and also the prerequisite of the further modifications of anthocyanins, which is jointly characterized by the glycosylation site, the type and number of the glycosyl as well as the glycosidic bond type. It generally enhances the stability, results in the hypsochromic effect and blueing, decreases the bioavailability and anticancer activity, and decreases, increases, or does not change the antioxidant activity of the anthocyanidins or anthocyanins, which is synergetically determined by the glycosylation site and the type and number of the glycosyl. Thereinto, in nature, the blue hues caused by the glycosylation may also be reinforced by the formation of the anthocyanic vacuolar inclusions. This review could provide a reference for the research of the structure-optimizing and function-exploiting of anthocyanins.     

Sampling and digestion of waste mobile phones printed circuit boards for Cu,Pb, Ni,and Zn determination

Sampling is the most important procedure in arriving at the value of an electronic scrap. Inappropriate sampling makes other procedures, including assaying, valueless, as the sample must really represent the electronic scrap from which it was taken. The aim of this study was to develop the procedure to investigate the composition of heterogeneous printed circuit boards (PCBs) material and to show its applicability as well as its related limitations. The contents of Cu, Pb, Ni, and Zn in PCBs from wasted mobile phones were determined. Mixtures of aqua regia, hydrogen peroxide and hydrofluoric acid were applied to sample digestion. Open and closed vessel wet digestion with or without heating and microwave-assisted one was realized. For these purposes different sample amounts (0.2, 0.4, and 0.5 g) were applied and on the basis of calculated relative standard deviation values (RSD), the precision of repeated the most effective digestion was evaluated. The microwave-assisted wet digestion and mixture of aqua regia and hydrogen peroxide was found as the most effective one of the compared mixtures and applied conditions. A sample amount of 0.5 g was found as the most suitable. RSD values confirm the importance of electronic waste material sample preparation.     

高分子模板调控不同形貌氧化亚铜的仿生合成

采用聚丙烯酰胺(PAM)为软模板,在CuSO4、Na2SO3体系中调控合成了片状、海胆状、一维线、针状聚集体氧化亚铜晶体。研究了不同浓度Cu2+、不同PAM含量及不同温度对晶体生长的影响。结果表明,PAM促使氧化亚铜异相成核,氧化亚铜形貌随PAM质量分数的变化而变化:当c(Cu2+)=0.5mol.L-1时,PAM质量分数为3.0%(常温引入体系),产物主要为片状晶体;PAM质量分数为1.0%、3.0%时(高温引入体系),分别获得一维线状、海胆状晶体;当Cu2+浓度为0.1 mol.L-1时,体系中高温引入质量分数3.0%的PAM,得到片层状晶体;当Cu2+浓度为0.3、0.4 mol.L-1时,得到针状聚集体氧化亚铜晶体。分别用X射线粉末衍射、冷场发射扫描电子显微镜和激光粒度仪对所制备的产品进行了表征。     

Enantiomeric separations of four basic drugs containing N-alkyl groups by a RP-HPLC system using SBE-β-CD as chiral mobile phase additive

The chiral separations of four pharmaceutical racemates which contain N-alkyl groups were satisfactorily resolved using SBE-β-CD as a chiral mobile phase additive(CMPA)in a RP-HPLC system(the resolution is 2.701 for ondansetron hydrochloride,1.996 for sulpiride,1.293 for clenbuterol hydrochloride and 0.816 for omeprazole).In addition,the effects of different parameters such as CD type and CD concentration were investigated.The separation mechanism arises through the combination of several potential interactions,including electrostatic interactions as well as hydrogen bonding interactions and hydrophobic inclusion interactions,which allow for the SBE-β-CD–drug complexation with strong stereoselectivity and stability.The resolution also relates to the number and location of N atoms in the enantiomers.This method will be applicable to the isolation of various types of biologically important enantiomers containing N-alkyl groups.     

主链型阳离子表面活性剂聚季铵盐的制备

以N,N-二甲基-1,3-丙二胺、尿素及1,4-二氯丁烷为原料,通过共缩聚反应两步法制备了一种新的主链型的水溶性聚季铵盐.采用正交试验获得了制备聚季铵盐的最佳条件：N,N-二甲基-1,3-丙二胺与尿素的物质的量比为2∶1,反应温度为135℃,反应时间为11h,得到中间体双[3-（N,N-二甲基丙胺基）]丙脲,产率高达99％;中间体与1,4-二氯丁烷的物质的量比为1∶1,于90℃下反应6h.采用红外光谱和核磁氢谱对产物结构进行表征,测定了其热稳定性和特性粘数.     

From Zero‐dimensional to One‐dimensional: Use of Metal‐­Ligand Affinity in Supramolecular Assembly

The self‐assembly of 4 ‐ MTPP [ 4 ‐ MTPP = 2‐(methylthio)‐4‐(pyridin‐4‐yl)pyrimidine] with Cu(NO₃)₂ and AgNO₃ was structurally investigated. For Cu(NO₃)₂, a discrete mononuclear Cu^II coordination compound, [Cu( 4 ‐ MTPP )₂(NO₃)₂] ( 1 ), resulted that is exclusively based on Cu–N coordination. For AgNO₃, a unique one‐dimensional double‐chain structure ( 2 ) was obtained with the Ag–N distances varying from 2.181(9) to 2.223(9) Å, and the average Ag–S distance being 2.98 Å. Compared to zero‐dimensional 1 , the extension to one‐dimensional 2 is considered to result from the specific affinity between Ag⁺ and the ligand 4 ‐ MTPP that is attributed to the strong coordinating tendency of silver for aromatic nitrogen and thioether sulfur atoms.     

2 D Manganese Vanadate Nanoflakes as High‐Performance Anode for Lithium‐Ion Batteries

Nanometer‐sized flakes of MnV₂O₆ were synthesized by a hydrothermal method. No surfactant, expensive metal salt, or alkali reagent was used. These MnV₂O₆ nanoflakes present a high discharge capacity of 768 mA h g^?1 at 200 mA g^?1, good rate capacity, and excellent cycling stability. Further investigation demonstrates that the nanoflake structure and the specific crystal structure make the prepared MnV₂O₆ a suitable material for lithium‐ion batteries.     

A novel two‐dimensional CdII coordination polymer: poly[aqua[μ4‐2‐(4‐carboxylatobenzoyl)benzoato]cadmium(II)]

The title Cd^II coordination framework, [Cd(C₁₅H₈O₅)(H₂O)]_n or [Cd(bpdc)(H₂O)]_n [H₂bpdc is 2‐(4‐carboxybenzoyl)benzoic acid], has been prepared and characterized using IR spectroscopy, elemental analysis, thermal analysis and single‐crystal X‐ray diffraction. Each Cd^II centre is six‐coordinated by two O atoms from one 2‐(4‐carboxylatobenzoyl)benzoate (bpdc²⁻) ligand in chelating mode, three O‐donor atoms from three other bpdc²⁻ anions and one O atom from a coordinated water molecule in an octahedral coordination environment. Two crystallographically equivalent Cd^II cations are bridged by one O atom of the 2‐carboxylate group of one bpdc²⁻ ligand and by both O atoms of the 4‐carboxylate group of a second bpdc²⁻ ligand to form a binuclear [(Cd)₂(O)(OCO)] secondary building unit. Adjacent secondary building units are interlinked to form a one‐dimensional [Cd(OCO)₂]_n chain. The bpdc²⁻ ligands link these rod‐shaped chains to give rise to a complex two‐dimensional [Cd(bpdc)]_n framework with a 4,4‐connected binodal net topology of point symbol {4³.6².8}. The compound exhibits a strong fluorescence emission and typical ferroelectric behaviour in the solid state at room temperature.     

有机化学教学中的“三融合、二反思、四进阶”创新教学模式*

为培养出新时代创新人才,构建的“三融合、二反思、四进阶”教学模式有效提升了学生们科技创新能力。依据有机化学特点,创设科学发现情境,通过核心知识点网融合(挑战度)、理论实践交叉融合(高阶性)和化学思政融合(课程思政)“三融合”策略,不断激发学生们学习兴趣;通过教师反思、学生反思的“二反思”过程不断优化教学过程,改善教学效果;最终使具有不同知识层次的学生通过“四进阶”教学策略逐步提升科创能力(创新性)。     

单颗粒光散射显微成像技术在生化医药分析中的应用

等离子体纳米颗粒(PNPs)具有体积小、易表面修饰、生物相容性好、毒性低等优点,在生物传感、生物成像、疾病诊断、肿瘤治疗、材料科学等领域得到了广泛的应用。PNPs的光散射光学性质可以通过调节其大小、组成、形貌和微环境来控制,可用于生化和药物分析。此外,由于单粒子散射显微技术具有高空间分辨率和高灵敏度,借助PNPs具有的独特局域表面等离子体共振(LSPR)特性,可在单颗粒水平进行实时成像。根据PNPs的大小、组成、形态、微环境或耦合变化引起的信号变化,研究人员发展了多种显微成像分析方法,主要分为4种,包括散射光谱的波长位移、单粒子散射强度的变化、高通量RGB分析和计数方法。基于纳米颗粒LSPR散射光谱位移变化的方法准确、灵敏,但需要昂贵的单颗粒散射光谱仪和复杂的操作。基于纳米颗粒散射强度变化的方法简单可行,但易受纳米颗粒粒径和曝光时间等因素的影响。高通量RGB分析方法灵敏度高、成本低,但不适用于颜色变化不明显的单颗粒分析,且重复性差。单粒子计数法灵敏度高,但有时粒子分布不均匀,背景杂质的干扰限制了方法的准确度。因此,这4种定量方法各有优缺点。此外,近年来逐渐发展了一些新的定量方法。例如,研究人员开发了新的时间分辨分析定量方法,并将暗场显微镜与偏振器、滤光片等光学器件相结合以消除背景干扰,以及与电化学、拉曼等仪器相结合以扩大应用范围。此外,为提高分析方法的准确度和灵敏度,暗场显微镜与深度学习、云计算、人工智能等现代计算机科学技术的结合,越来越受到人们的欢迎。基于以上原因,该文重点介绍了单粒子光散射显微镜在生化和药物分析领域的应用,总结了近年来的最新研究进展,讨论了单粒子光散射显微镜在定量分析中的几种主要定量方法,提出了未来的发展趋势,以期为相关研究领域的新人提供一定的学术参考。